Access PanelsQuick and easy access to hidden services and supported by QIC technical servicesInstalling a QIC access panel into your plasterboard wall or ceiling gives you quick and easy access to hidden services such as pipes, wiring or fusesAll of our QIC plasterboard access panels are supported by QIC technical services.

Insert the flat edge of a pry bar into the bottom seam of the damaged composite panelGently tap the pry bar's end with a hammer to loosen the panel, moving along the seam as needed, and then

Install composite aluminium panel Notice, the panels have a special protective coatingIt has a directionSo, the panels need to be installed in the same directionOtherwise, they will differ in colorUsually, the aluminium composite panel has a protective film on it with an arrow, that shows the direction of installation.

Inspection As with all materials, defects and damage can occur, and with fibre reinforced polymer composites (FRPs) this usually manifests itself as a reduction in strength and or stiffnessDependent upon the materials used to create the FRP, damage can be complex, varying and intricately related to a variety of service conditions and failure

Eliminate costly bottlenecks by letting us handle your metrology and CT X ray inspectionsQuickly and easily complete your measuring tasks to get parts out the door!

site structures and different ways of their inspectionDue to the high increase of interest in composite materials in past decades and their usage in different structures, there is a need to discuss the damage types in them along with dif ferent ways of inspectionThis paper provides a short review of these facts in

Visual inspection A basic and useful part of inspection on composite structures is a visual inspectionThe inspector looks for visible signs of damage to the structure like burns, disbonds, and

The panels consist of a plasterboard faced pivoting door tray and frame with a push catch or square drive operated lockThe door tray encapsulates a layer of mm plasterboard with a simulated beaded edge to the frame and door trayThis acts as a key for the tape and joint or skim coat.